|
I have a client that makes cushions for airplane seats. They
fashion the foam according to the specifications/design and send off to their
customer. They have worked very hard to cut the foam with a minimal
amount of waste, however a significant amount is generated on a monthly
basis. Does anyone have any ideas where this waste can be marketed for
re-use or recycle rather than the current practice of disposal? The foam
is: 1.
Closed cell foam – density is 2.2-2.3
(amount not known) 2.
Open cell foam – density of 2.4-3.2 (18,000 lbs.
per month) All foam is aircraft quality. It has fire prevention
additives, etc. The waste is in strips, pieces, odd shapes. Appreciate
any ideas that you can give us. Thanks,
CONNSTEP,
Inc. Email: jwlodarc@connstep.org
Cell: 860-539-4926 Fax: 860-529-5001 This email message is from
CONNSTEP, Inc., and is for the sole use of the intended recipient(s). It
may contain confidential and privileged information. Any unauthorized use,
disclosure, or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email (or connstep@connstep.org)
and destroy all copies of the original message. |